First Step – Getting the Raspberry Pi to Boot

Required Items

Raspberry Pi
2 GB or larger SD Card
Keyboard
Monitor (Composite or HDMI)
Display cable (Composite or HDMI)
USB Power Supply
USB Cable for power (Micro USB)
PC connected to the internet with a card reader

Optional Items

Case for Raspberry Pi
USB Mouse
Book – Raspberry Pi User Guide
by Eben Upton & Gareth Halfacree
ISBN: 978-1-118-46446-5 (Amazon Link)

NOTE: I am running these steps from a Windows 7 PC. If you are running from another OS be certain you read the information on the http://www.raspberrypi.org/downloads page for information for your OS. I am also using a 16 GB SDHC Card.

Steps

Go to the download section at http://www.raspberrypi.org/downloads
If you are running a Windows PC, download Win32DiskImager
I downloaded the version 0.5 binary (win32diskimager-binary.zip)
Download the Raspbian “wheezy” image
I downloaded via the direct download.
The version at the time of this blog entry is 2012-12-16-wheezy-raspbian.zip
Open the zip file (2012-12-16-wheezy-raspbian.zip) and extract the image file (2012-12-16-wheezy-raspbian.img)
The following steps are modified from the “Easy Way” section from http://elinux.org/RPi_Easy_SD_Card_Setup
Insert the SD card into your SD card reader and check what drive letter it was assigned. You can easily see the drive letter (for example G:) by looking in the left column of Windows Explorer. If the card is not new, you should format it; otherwise Win32DiskImager may hang.
Extract the Win32DiskImager utility files from the zip file (win32diskimager-binary.zip) and run the Win32DiskImager utility (Win32DiskImager.exe). You should run the utility as Administrator! (Right click on Win32DiskImager.exe and select “Run as administrator from the context menu.)
Select the 2012-12-16-wheezy-raspbian.img image file you extracted earlier
Select the drive letter of the SD card in the device box. Be careful to select the correct drive; if you get the wrong one you can destroy your computer’s hard disk!
Click Write and wait for the write to complete.
Exit the imager and eject the SD card.
Insert the card in the Raspberry Pi, power it on, and it should boot up. There is an option in the configure script that comes up to expand the partitions to use all of the SD card if you have used one larger than 4 GB

Second Step – Initial Configuration of the Raspbian “wheezy” distribution

When you boot up the Raspberry Pi, the Raspi-config utility will launch.

There are a few things that you should configure right away or you may have problems later.

Expand the root partition if your SD Card is greater than 4 GB (Optional)
1. Select “expand_rootfs” from the Raspi-config menu
2. The Raspi-config widow will disappear for a bit then a new window will display telling you that the root partition has been resized and the file system will be enlarged upon the next reboot. Click enter to close the dialog.
Configure the keyboard (You must do if you are not using a UK keyboard!)
I did not perform this step the first time I booted up the Raspberry Pi and I had issues as I could not use the pipe symbol. The “|” was mapped as a tilde “~” symbol.
1. Select “configure_keyboard” from the Raspi-config menu
2. You may keep the default “Generic 105-key (Intl) PC” model or change it to match your keyboard
3. Press enter or Tab to the bottom options and select “<OK”>” and press enter
4. If you are not using a UK keyboard, select “Other”
5. Press enter or Tab to the bottom options and select “<OK”>” and press enter
6. Select your country of origin from the list (i.e. English (US))
7. Press enter or Tab to the bottom options and select “<OK”>” and press enter
8. Select the keyboard layout (i.e. English (US))
9. Press enter or Tab to the bottom options and select “<OK”>” and press enter
10. Select the option for the AltGr modifier (i.e. The default for the keyboard layout)
11. Press enter or Tab to the bottom options and select “<OK”>” and press enter
12. Select the option for the Compose key (i.e. No compose key)
13. Press enter or Tab to the bottom options and select “<OK”>” and press enter
14. Select an option for the Control+Alt+Backspace key combination
15. Press enter
16. There will be some delay as the options are saved
17. The Raspi-config menu will reappear
Change the locale (You should do if you are not in the UK)
1. Select “change_locale” from the Raspi-config menu
2. Scroll down to the “en_GB.UTF-8 UTF-8 option and deselect it by pressing the spacebar (You do not need to remove it. You may keep it if you like.)
3. Scroll through the list to find the locale(s) you wish to install and select it/them by pressing the spacebar (i.e. en_US.UTF-8 UTF-8)
4. Tab to the bottom options and select “<OK”>” and press enter
5. Select the default locale for the system (i.e. en_US.UTF-8 UTF-8)
6. Press enter or Tab to the bottom options and select “<OK”>” and press enter
7. There will be some delay as the options are saved
8. The Raspi-config menu will reappear
Change the time zone (Unless you want to stick to UTC)
1. Select “change_timezone” from the Raspi-config menu
2. Select your geographic area (i.e. US)
3. Press enter or Tab to the bottom options and select “<OK”>” and press enter
4. Select your time zone (i.e. Eastern)
5. Press enter or Tab to the bottom options and select “<OK”>” and press enter
6. There will be some delay as the options are saved
7. The Raspi-config menu will reappear
If you have a hardwired internet connection, you may try to update Raspi-config
1. Select “update” from the Raspi-config menu
2. Press enter or Tab to the bottom options and select “<OK”>” and press enter
Once you are done making changes, press the tab key to jump to the options at the bottom of the screen and select “<Finish>”
Depending on the options selected, you may be prompted to reboot. If given the option, reboot your Raspberry Pi as most options do not take effect until the Raspberry Pi reboots.

<<FIRST <PREVIOUS | NEXT>